"Do It Yourself" DIY Module:Orbita RotorWind Build your own Winder.
Each Winder Module costs $395 and the power pack $150. Electric PowerPack is recommended for multiple modules (or motors). You need one power pack for every 20 Winder Modules. You may choose the fully programmable Modular System if you prefer just click here. There is a battery pack if you need to wind only 2 winders at a time. The battery pack can only wind 2 winder heads (or modules) at the most. Add 1 unit to Cart with power option. Then add additional units without choosing a power option or call us to order.
The ROTORWIND winder module makes it easy for fabricators to design and build a custom winder system for a closet, safe or any special storage area. They are completely self contained units and operate on low voltage, readily available alkaline batteries. With battery life measured in years, not months, there is no need for installing any high voltage electrical house wiring.
Installation is both quick and easy. Using a panel with a thickness of 3/8" (10mm), all that is needed is a bored 3-3/8" diameter hole for each module. The module is inserted from the rear of the panel and held in place with 4 - 3/8" (10mm) wood or sheet metal screws. Panels can be of heavier construction if desired. Simply machine a "pocket" which is 4" x 4" for each unit leaving a 3/8" wall thickness.
Each module is supplied fully assembled. All that is required is to connect the two 48" lead wires (red and black color) of each module to a 3 VDC PowerSupply Pack or Battery Pack. The oscillating winding action of the SPARTA winder is totally self-regulating and there is absolutely no chance of damaging an expensive watch by over-winding. A semi-circular rotor, attached to the back of the mounting cup, is the "heart" of the patented ROTORWIND® system.
Panels may be mounted vertically or tilted back 5° to 10° for fail-safe operation in the event that mounting cups are not positioned correctly. Modules can be mounted on a 4" x 4" grid although the 6" grid shown on the first photo below provides adequate space for battery holders. Operation is virtually silent and there is absolutely no maintenance required. Modules are guaranteed for 2 years operation but are designed to easily provide 8-10 years of life without attention.
